YOUnite Server Service Configuration (API)

#
# Internationalization settings
#
server.lang=en_us

#
# PostgreSQL database configuration
# regarding pool size, see:
#   https://github.com/brettwooldridge/HikariCP/wiki/About-Pool-Sizing
# a size of 10 is likely plenty for an instance running on a 4 core VM.
#
spring.datasource.driverClassName=org.postgresql.Driver
spring.datasource.url=jdbc:postgresql://localhost:5432/younite
spring.datasource.username=younite
spring.datasource.password=younite
spring.datasource.hikari.maximum-pool-size=10
spring.datasource.continue-on-error=true
spring.jpa.database-platform=org.hibernate.dialect.PostgreSQLDialect


#
# Flyway configuration and placeholders
#
spring.flyway.out-of-order=true
spring.flyway.baseline-on-migrate=true
spring.flyway.placeholder-replacement=true
spring.flyway.placeholders.secret.mdmadmin=no-longer-in-use
spring.flyway.placeholders.secret.dgs=no-longer-in-use
spring.flyway.placeholders.secret.resourceServer=no-longer-in-use
spring.flyway.placeholders.secret.notificationService=no-longer-in-use


# HTTP encoding (HttpEncodingProperties)
spring.http.encoding.charset=UTF-8
spring.http.encoding.enabled=true
spring.http.encoding.force=true

# Max file / request sizes for multipart uploads - 10MB by default
spring.servlet.multipart.max-file-size=10MB
spring.servlet.multipart.max-request-size=10MB

#
# Elastic / Logstash config
#
logging.logstash.enabled=true
logging.elastic.enabled=true
logging.service.name=YOUnite Server
logging.logstash.host=localhost
logging.logstash.port=4560
#optional SSL config for logastsh (if trust store is not specified,
# default is used)
#logging.logstash.enable.ssl=true
#logging.logstash.truststore.location=/truststore.jks
#logging.logstash.truststore.password=password

# turn off the health indicator for elastic
management.health.elasticsearch.enabled=false


# Actuator endpoints, like /health, keep them at root level.
management.endpoints.web.base-path=/

# Setting for notifications, data virutalization
notifications.enabled=false
data.virtualization.enabled=false

#
# Managed Role UUIDs
# These are automatically loaded into the database with these UUIDs,
# however, if for any reason they were to be changed, the UUIDs would
# need to be updated here.
#
root.admin.role.uuid=6e3f41af-0900-4f4d-b3cd-ecfa523bfae4
dgs.role.uuid=74e9b1d4-f523-4cea-a263-8c8e24b44348
zone.admin.role.uuid=2cbe3da0-4caf-49f5-b62c-b3b37f00aeec
zone.data.steward.role.uuid=56cb3bf0-1796-4ece-b7b3-1ca52316f521


#
# OAuth2 configuration
#

#
# Open ID Connection information, required for authentication.
#
# younite.api.url             = URL to the public endpoint for the YOUnite
#                               Server API. Required for a redirect after
#                               authentication is completed.
# oidc.discovery.document.url = the URL of the discovery document with Open
#                               ID Configuration
# oidc.client.id              = Client ID
# oidc.client.secret          = Client Secret
# oidc.scope                  = Scope to pass to the auth server. must include
#                               "openid", and typically the sso attribute we need,
#                               ie "openid email".
# oidc.sso.attribute          = Attribute(s) to map to SSO ID in the system. The
#                               default value is "email,clientId". The inclusion
#                               of clientId ensures that a client (such as the
#                               Notifications Service) can be authenticated as it
#                               may not have an email.
# oidc.successful.login.url   = URL to send the user to when they successfully
#                               authenticate (such as the UI dashboard)

#default values
younite.api.url=http://localhost:8080/api
oidc.discovery.document.url=http://localhost:8800/.well-known/openid-configuration
oidc.client.id=client-id
oidc.client.secret=client-secret
oidc.successful.login.url=http://localhost/dashboard
oidc.scope=openid email
oidc.sso.attribute=email,clientId

# Example Open ID Connect config w/ Google
#younite.api.url=http://localhost:8080/api
#oidc.discovery.document.url=https://accounts.google.com/.well-known/openid-configuration
#oidc.client.id=948315574471-8ord9c3cfij75v10c5bst1llotmrn9e7.apps.googleusercontent.com
#oidc.client.secret=hqgrqUccItDHPM_BrGSk61bV
#oidc.successful.login.url=http://localhost/dashboard
#oidc.scope=openid email
#oidc.sso.attribute=email

# Token expiration in minutes 1440 = 24 hours
security.access.token.validity.minutes=1440

ultimate.root.zone.uuid=6c5a754b-6ce0-4871-8dec-d39e255eccc3

#
# optional configuration for the data queue listener
#
# enable performance stats - will be displayed as INFO messages periodically.
# the default value is false.
data.queue.listener.enable.stats=false
# if performance stats are enabled, the frequency in seconds they should be
# displayed (or -1 for every request)
data.queue.stats.frequency=30

# URL, username, password of the message bus
message.bus.url=tcp://localhost:61616
message.bus.username=artemis
message.bus.password=artemis

# number of message bus sessions to cache. the default value is 10.
# this mostly applies to outgoing messages as incoming messages are handled
# by persistent message consumers (though they may increase / decrease per
# demand). For efficiency, the value should be
# message.bus.data.queue.concurrency or larger, otherwise at full concurrency,
# session caching will not be sufficient for demand and new sessions will
# be created frequently.
message.bus.session.cache.size=10

# send messages asynchronously? default is false.
# this may increase throughput but lead to data loss if the connection to the
# message bus is interrupted.
message.bus.send.async=false

# the name of the router's connection to the message bus. the value must be
# unique!!  if not specified, younite-api-(random UUID) will be used.
#message.bus.client.id=

# concurrency levels for the various message bus queue listeners. values can
# be specified as a single value or a range. if a single value is used, that i
# indicates the maximum, with a minimum of 1.
# NOTE: specifying a range for message.bus.data.queue.concurrency is disabled
# as it may cause unpredictable results in relation to message grouping via
# JMSXGroupID. if a range is specified, the maximum value is used.
message.bus.data.queue.concurrency=5
message.bus.ops.queue.concurrency=1-5
message.bus.link.queue.concurrency=1-5
message.bus.adaptor.log.queue.concurrency=1-5

#
# Require verification from the message bus of the adaptor's UUID?
#
# When true (the default), JMS messages are validated by checking the
# JMSXUserID property, which must be set to the username of the authenticated
# user by the message bus. In Artemis, this is enabled by setting the
# populate-validated-user setting in broxer.xml to true. Another option in
# Artemis is to send this as a parameter to the JVM
# ie -Dbrokerconfig.populateValidatedUser=true.
#
# It is strongly recommended not to set this to false as that would enable any
# authenticated user with access to a queue to spoof another adaptor's uuid.
#
message.bus.verify.adaptor.uuid=true

# ActiveMQ Queue management via Jolokia REST endpoints
# Username/password default to the ones used to connect to the bus
active.mq.api.uri=http://localhost:8161/console/jolokia/
active.mq.api.username=${message.bus.username}
active.mq.api.password=${message.bus.password}
active.mq.api.broker.name=0.0.0.0

# cookie management - domain
#cookie.domain=.domain.com

#
# ACL caching is enabled by default. The following can be used to disable and
# tune ACL caching. For very large numbers of ACLs performance may not be
# improved by caching or memory consumption could be too costly.
#
# Options:
# - acl.cache.disable = enable/disable ACL cache
# - acl.cache.maximum.size = maximum size of the ACL cache (each entry is a
#   list of routes for an action for a domain version from a source adaptor)
# - acl.cache.maximum.route.size = maximum number of ACLs to load from the DB
#   before deciding this ACL is too complex to cache
# - acl.cache.maximum.dr.size = maximum number of DR UUIDs to load from the
#   DB before deciding this ACL is too complex to cache
#
# In the event that a route is "too complex" to cache, all events against that
# route will go directly against the database instead. This can be useful
# particularly for a rule that has a lot of DR UUIDs to force that route to
# query the database but still allow others to be cached that are less complex.
#
# defaults:
#acl.cache.disable=false
#acl.cache.maximum.size=10000
#acl.cache.maximum.route.size=5000
#acl.cache.maximum.dr.size=100